The Capsule360 uses connection cables to trigger your camera. Your unit will be shipped with the proper camera connection cables. The Capsule360 is a motion timelapse device, which is compatible with many brands and camera models. You can use the same device with many different cameras by just changing the connection cable.
The Capsule360 has separate outputs for the camera. The output ports are located on the side the device.
The Capsule360 has separate outputs for the camera. The output ports are located on the side the device.

The camera cable port is a 2.5 mm stereo female jack. The camera cables have the male 2.5 mm stereo jack on one end. This end is plugged into the camera connection port. The other end changes depending on the camera make and model. This end is plugged in the shutter release port of your camera.
The external port : This mode helps you to trigger your camera via a device that you connect externally. For instance, you can use an external microphone to send signal command above a specific decibel to trigger your camera to take a shot.
You can use both of the outputs at the same time. They are electrically isolated from each other. They trigger the connected device synchronously.
The camera cables are designed to trigger the cameras only. Do not use it for any other purpose. Doing so may damage the cable or the device.
The camera cables are designed to trigger the cameras only. Do not use it for any other purpose. Doing so may damage the cable or the device.