Basic Video mode allows you to take dynamic videos. It has 4 parameters.
Movement: This parameter defines how much the device should rotate. Clicking the rectangular box on the screen opens the Angle Setup screen. The point A defines the starting position and the point B defines ending position of the movement. You can select the points by clicking the circle buttons on the bottom and change the position by using the slider on the top. Once the position is changed, an orange button will appear to save the new position.
CCW : Counterclockwise (Slide in this direction and your Capsule will rotate counterclockwise)
CW : Clockwise (Slide in this direction and your Capsule will rotate clockwise)
CW : Clockwise (Slide in this direction and your Capsule will rotate clockwise)
Speed : This parameter defines the speed of the movement. You can set a value from 10 up to 100.
Ease IN/ OUT : This parameter defines the transition effect from standstill to desired speed. There are 3 options.
Low : Capsule accelerates from standstill to the desired speed slowly.
Medium : Capsule accelerates from standstill to the desired speed moderately.
High : Capsule accelerates from standstill to the desired speed quickly.
Mode : This parameter defines the movement type. There are 3 options.
One way: Capsule moves from Point A to Point B and the motion ends.
Two way: Capsule moves from Point A to Point B, then back to Point A and the motion ends.
Continuous: Capsule moves continuously between points A and B
Two way: Capsule moves from Point A to Point B, then back to Point A and the motion ends.
Continuous: Capsule moves continuously between points A and B
How does it work?
Once you set all the parameters, click the Start button on the lower right corner. A status screen will open and your camera will start moving. You can see all the progress in the status screen. The status screen shows the total movement progress, the elapsed time and the remaining time,