Lightning Mode

Step-by-Step Guide:

1. Connect Spark to Snap Pro Camera:

   • Open the Snap Pro Camera app on your iPhone.
   • Navigate to the Settings menu and select Connect to Spark.
   • Tap the Search button, locate your Spark device, and establish the connection.
     
     
     
     
     

2. Activate Lightning Mode:

   • Return to the main screen of the app.
   • Tap the function selection menu located in the top-left corner of the screen.
   • Select Lightning Mode from the list. This will activate the Lightning mode.
     
     
     
     

3. Adjust Sensitivity:

   • By default, the sensitivity value is set to 50. Tap on the sensitivity value, and use the slider to increase it to around 90 for better responsiveness.
   • Once adjusted, press the red shutter button to start the mode.
     
     
     
     

4. Active Mode Indicators:

   • When Lightning mode is active, the red circular shutter button will shrink to a smaller red dot in the center.
   • You will see a "0" appear above the shutter button, which represents the number of photos taken.
     
     
     
     

5. Test the Lightning Trigger:

   • After starting Lightning mode (with sensitivity at 90), quickly pass a bright light source (like a flashlight) in front of the sensor a few times.
   • You should see the photo count (next to the shutter button) increase as the Spark captures lightning events.