The Bulb Ramping Timelapse mode gives you the opportunity to take time-lapse photos with changing exposures. In regular time-lapse modes, all of the pictures will have the same exposure. This can be enough for some cases, but sometimes the light changes throughout the whole photo taking process. The exposure needs to be adjusted accordingly to avoid too dark or too bright pictures. Bulb Ramping Timelapse mode takes care of that.
Interval: This parameter defines the duration between each frame. The Interval can have a value from 13 milliseconds up to 100 hours.
Initial Exposure: This value defines the initial exposure value for each photo. You can set a custom exposure up to 100 hours in milliseconds.
Final Exposure: This value defines the final exposure value for each photo. You can set a custom exposure up to 100 hours in milliseconds.
Frame: This parameter defines how many pictures are to be taken. You can set the frame number from 5 up to 65535.
The process starts with Initial Exposure. With each frame, the exposure will be changed towards the final exposure linearly. At the final frame, the picture will have the final exposure. In order to be able to create custom exposure, the camera must be in BULB mode; otherwise, all of the pictures will have the same exposure.
The exposure value can have an ascending or descending change. This depends on the initial and final exposure values. The change of exposure will be the same between each frame.
You can stop the mode by touching Stop button 2 times. When you touch first time, the lock will be opened and when you touch it second time, mode will stop.