The Basic Timelapse mode offers to take time-lapse photos automatically without changing the exposure. It has two parameters; Interval and Frame.
Interval: This parameter defines the duration between the starting points of each frame exposures. Please note that Interval value must be longer than exposure value.
Frame: This parameter defines how many pictures are to be taken. You can set the frame number up to 65535. If you set the frame number to 0, this will mean that the time-lapse will continue until you stop it.
The Basic Timelapse mode does not offer any control over the exposure. The exposure settings of your camera will be valid.
Once you set the parameters and press start button, a status screen will be opened as below.
The Interval counter will show the interval value. Each time timer of the interval goes off, a photo with the exposure value will be taken. After the exposure is over the frame counter will be increased by 1 and the interval counter will start again. This will continue until the targeted number of frames is achieved.
You can stop the mode by touching Stop button 2 times. When you touch first time, the lock will be opened and when you touch it second time, mode will stop.